What do you need to prepare before a Starlink installation at home?
4 min read · Written by Mustafa Husain, Founder of SAS4HomeIT · Published November 2, 2026 · Updated November 7, 2026
Before a Starlink installation you need five things sorted: the kit itself, a position with a clear view of the sky, any building approval, a route for the cable to your main IT rack, and a decision about how it connects to your existing network. Most delays come from the last three, not the dish.
1. Your Starlink kit
Starlink hardware and plans are ordered and managed directly with Starlink, through starlink.com. Availability in the UAE has been limited, so check there for current stock and delivery times. An installer cannot speed up or reserve a kit for you.
Download the Starlink app on your phone as well. Starlink's setup guide uses it for the install process, for alignment alerts and for the obstruction tool.
2. A clear view of the sky
Starlink's setup guide says the dish needs a clear view of the sky, and that a tree branch, pole or roof in the way will cause service interruptions. If the view from the ground is blocked, it suggests an elevated location such as a roof, pole or wall.
You can check this before the kit arrives. In the Starlink app you can start setup without the device: it asks whether you have a clear view of the sky or need to find a location, asks for location permission, and lets you use your phone's camera to check the spot.
3. Building or landlord approval
In an apartment or a managed community, check with your landlord or building management before mounting a dish on a facade, balcony or roof. This is a question about your building's rules, and an installer cannot confirm it for you.
4. A route for the cable to your IT rack
The cable has to run from the dish down to where your network equipment lives. The Standard kit guide lists a 15 m (about 49 ft) Starlink cable, so on a larger villa the distance from the roof to your main IT rack is worth measuring first.
Know where your main IT rack is and how easily a cable can reach it. If your home does not have a rack, message us before booking and we will tell you what is possible.
5. How it connects to your existing network
In Starlink's Standard kit guide, the router has extra ethernet ports, and the guide shows plugging in your own ethernet cable and connecting the other end to your wired mesh or third-party hardware. The same guide also mentions a bypass mode on the router, so if you plan to use your own router, check Starlink's current instructions for your exact kit first.
Our installation sets the Starlink up with the wired or wireless network you already have, rather than building a new one.
Key terms
- IT rack
- A cabinet or wall-mounted frame in the home where the network equipment, such as the router, switch and patch panel, is housed and cabled together.
Frequently asked questions
Can Starlink work with my existing router or mesh WiFi?
According to Starlink's Standard kit guide, its router has extra ethernet ports for connecting your own wired mesh or third-party hardware. Check the instructions for your exact kit, and we set it up with your existing wired or wireless network.
Does the Starlink cable reach my IT rack?
The Standard kit guide lists a 15 m cable. Whether that reaches depends on the route from the dish to your rack, so measure it before the installation visit.
Do I need building approval to install Starlink at home?
For an apartment or managed community, check with your landlord or building management before mounting on a facade, balcony or roof. For a villa you own, mounting is usually your own decision, and we still check the sky view before mounting.
Want this handled for you? See our Starlink Installation service for what is included and how a visit works.
Ask a technician